Narrow Multi-Bay Rack Optimized for Video Cable Bundle

• Narrow multi-bay racks optimized for video cable bundles
• UL Listed in the US and Canada
• Fully welded construction provides:
  • Static load capacity: 10,000 lbs.
  • UL Listed load capacity: 2,500 lbs.
  • Seismic Certified load capacity: 845 lbs.
• Horizontal bars with 7" centers for quick "tie-&-slide lacing"
• Broadcast standard 22" OD width
• Fully welded construction, open sides
• Seismic certified (UBC 1997 & CBC 1998 Zone 4; IBC 2000, IBC 2003, ASCE 7 - 02, NFPA 5000 Seismic Use Group III) for protecting 845 lbs. of essential equipment when used in conjunction with our VRK-Z4 brackets
• 2 pairs of wider rackrail provide more interior room
• Laser-cut 1/8" thick internal steel braces for strength
• 14-gauge steel tops & bottoms, 16-gauge seamless steel sides
• Grounding and bonding stud installed in base
• Configurable open top accepts a number of top options
• Keylocked vented rear door standard
• Finished in a durable black textured powder coat

Please call for price

10-Space Table Top Rack Stand for Studios or Store Displays

• Supplied with rack hardware
• RS-10 EU - Uses European 6 mm hardware
• RS-10 AM - Uses merican 10/32 hardware
• Height: 26.3" - 67cm
• (*from tilt adjustment knob to floor)
• Width: 20.8" - 52.8cm
• Leg depth: 15" - 38cm
• Frame size: 20x20mm
• Weight capacity: 150lb - 67.9kg
• Weight: 5.3lb - 2.4kg

Please call for price

Straight 14 space rack stand add-on unit

• Can be easily mounted onto RS - 507, RS - 510, and RS - 513 rack base units
• RS - 514 EU - Uses European 6mm hardware
• RS - 514 AM - Uses American 10/32 hardware
• Height: 24.8" - 63cm
• Width: 21.3" - 54cm
• Depth: 19.7" - 50cm
• Weight capacity: 200lb - 90.5kg

Please call for price

KAR enclosed audio rack

• Welded, 16-gauge cold-rolled steel construction.
• Fully adjustable front rack rail with optional rear rail kits also available.
• 16-gauge steel rack rail supports are punched with 1/4" holes for cable tie off points.
• Available in outside depths of 22" and 28", accommodating equipment up to 20" and 25" respectively.
• Removable conduit knockout panels at both the top and bottom rear of the enclosure.
• Additional knockouts are located on each side of the rack for passing cable directly through and allowing racks to be ganged.
• A uniqe cable strain-relief furrow is located in the bottom pan of the rack, as are punched holes to accommodate optional casters without the use of a costly caster base.
• Sides, top and bottom have venting slots to ensure adequate cooling.

Please call for price